1 Manuai brushing
  A painting way to dip the paint material.
    2 Air spraying
    A painting way to compress the air
    3 Airless spraying
   A painting way to use the drive increase the paint pressure to explore to get the paint atomization.
    4 Hot spraying
   A painting way to heat the paint material to lower the viscosity, so as to get the painting viscosity.
    5 Electrostatic spraying
A painting way to make paint material atomized through electro principle to get electronic and movement.
    6 Electrostatic powder spraying
    A painting way to make paint material atomized through electro principle to get electronic and movement.
    7 Flame spraying

A painting way to make the power material fuse or half fuse through flamed to jet on the pretreatment surface.
    8 Automatic-spraying
A painting way to use electronic ware or mechanism to control.
    9 Electro-coating。

The coating method of using external electric field in suspension in the electrophoretic fluid pigment and resin particles deposited.
    10 Anode electro-coating
The coating method of using external electric field in suspension in the electrophoretic fluid pigment and resin particles anode deposited.
    11 Cathode electro-coating
The coating method of using external electric field in suspension in the electrophoretic fluid pigment and resin particles cathode deposited.
    12 Autophoresis coating
A painting method to take paint chemistry reaction to make material deposited automatically. 
    13 Dipping
A painting method to take out pieces from liquid material and eliminate excessive material.
    14 Flow painting
A painting method to spray or curtain coating on pieces surfaces.
    15 Tompoming
Using cotton to wiping the material repeat.
    16 Curtain painting
A painting method to make the flowing material on the quickly pass board material.
    17 Roller painting
A painting method to dip the material on the pieces surface through running the roller.
    18 Barrel enamelling。

A coating method to make coating form film through put the pieces into drying V platen, make the platen run and pieces get full paint material, then heating the platen.

    19 Centifugal enamelling。

A coating method to put the pieces into cone-shaped piece of mesh-like sets, immersed in paint tank, filed drip dry, high-speed rotation to throw out the workpiece excessive paint material.

20 Fluidized bed painting。

Make the power paint material into several holes clapboard cylinder or rectangle container, the compressing air come from bottom clapboard to make the paint grain handing or writhe liquid method.

    21 Fluidized bed electrostatic painting
A painting method to take the static reaction
    22 Powder electro-deposition。

A painting method to make a certain power material detract into electrophoresis resin liquid, under the electricity reaction, the power material deposited on the panel surface. 
    23 Hot melt painting
A coating method to pre-heat the pieces to the power material melting point, then coating.
       25 Robot painting
A automatic coating method to use the machine and mechanism arm to replace the manual work. 

    26 Colour changing
The process of changing the paint material color from one to another through spraying.
    27 Priming
The process of base coating.
    28 Puttying
The process of scraping the putty.
    29 Grinding
The process of making the coating film flatness through sanding cloth, pneumatic sanding tools.
    30 Topcoating
The top layer of he base layer
    31 Glazing
The process to coating one time or several times clear coating or increase the top coating gloss.
    32 Paint mixing
The process of making the original liquid to the standard viscosity.
    33 Masking
The process of shading the jointer part through some operation or material without painting.
    34 Wet on wet
The coating method to coating after one time not dry coating.
    35 Detearing
The process to eliminate the pieces excessive paint maerial , such as drips, static eliminate dript.
    36 Flash off
The process to volatilized solvent in the coating.
    37 Flash off time
The interval time of wet to wet or drying to volatilized solvent time.
    38 Repair
   The process to coverage some part, so as to repair surface defective or damage old coating film. 
    39 Polishing
   The process to clean the coating glossary.
    40 Tacring
    The process of wiping pieces surface eyewinker before spraying.
    41 Throwing power
The deposit coatings ability of, electrophoretic coating in the workpiece departure from the electrode position (inside, concave, crevice, etc.) under certain conditions

    42 Interval between coating
The time interval of repeating coverage before last time coating.
    43 Applicable  viscosity
Paint viscosity suitable the paint method.
    44 Thinner ratio
The ration of original liquid and thinner.    

 45 Cathode/anode ratio
area ratio of electrophoretic coating in the cathode and the
    46 Quantity for spray
The paint bulk of paint spray consumption per unit time.
    47 Deposition conditions

General name of electro-coating deposition of conformity of the coating used in voltage, current and time.

    48  Painting enviroment
The general name of painting temperature, moisture, sunshine, air clean degree and fire resistant.
    49 Spreading rate
The paint material coverage area of per cubage.
    50  Spray booth
A closed or half closed instrument to process spraying, so as to protect paint dust flow or collected.
    51 Spray gun
A tool to atomized the paint and jet to the basic surface.
    52 Coil coater
The instrument to coat the coil.
    53 Painting brusth
The brusher to dip paint process
    54 Spatula
A tool to scraping the putty.
    55 Rack
The hanging shelf to hang the pieces during painting work.
    56 Busbar
Link rectifier (or DC motor) and the electrophoresis tank between the conductive copper or aluminum row
    57 Powder feeder
    A instrument for painting power conveyor and control.
    58 Ultrafiltration system
  Aclosed loop flushing system composed by ultra filtration device and electrophoresis tank and post-washing equipment

    59 Cathode cell

Electrophoretic coating at the anode in the electrophoresis liquid is used to control and remove the impurity ions PH non-pigment and resin, through the hanging cathode shell. This hood is made by a semi-permeable membrane.
    60 Fly paint
The paint dust adhesive on the surface during the spraying.