1 Drying
   The coating film become solid static from the liquid。
    3 Surface dry
   The coating form a very thin layer and soft membrane form the liquid static。
    4 Dust-free dry
   The coating form liquid statues to the touch drying without dust impact。
    5 Dry to tauch
   The coating from liquid to figure touch, not appear the press remake and not feel adhibit。
    6 Hard dry 
  The coating from the liquid become to surface not adhibit while press, it also can be processed brushing statues。
    7 Drying time
   Under the condition, the time from liquid coating to drying statues。
    8 Stoving
   Heating to make the wet coating become dry curing。
    9 Air drying
   Wet coating stay at the open air under general temperature, the coating become dry course
    10 Infra-red drying
   Take the infrared ray to make the coating dry and cure the wet coating.。
    11 Covection drying
   Use the hot air converting and cure the wet coating course。
    12  Combination drying
   Use the air convection and heat radiation combination dry and cure the wet coating  。
    13 Oxidation drying
   The wet coating effect with the oxygen to dry and cure 。
    14 Hot polymerization drying
   Wet coating resin converge to dry and cure。
    15 Catalysis polymerization drying
   Take the catalyzer to make the wet coating resin converge dry and cure, we also call it catalyze cure。

    17 Photo-curing
   Take the wave length illumination to access converge and make the wet coat dry and cure. 。
    18 Electromagetic iduction drying
   Take work frequency and high frequency electricity in the lead circuit inside to form quickly magnetic field , make the pieces in the magnetic field surface produce faradic and increase the wet coating dry。
    19 Ultra-violet curing
   Take the ultraviolet radiation to dry and cur the wet coating。
    20 Overbaking
   Appear brittleness, burnt because of drying seriously。