1 Coating
   One time painting to cover the coating。
    2 Film
  Coating one time or several time to get the continue coating film。
    3 Coat system
  Composed by the same coating or different coating。
    4 Priming coat
  The coating is under the middle coating or top coating, or painting on the basic board surface. 。
    5 Intermediate coat
  The coating between the base coating and top coating 。
    6 Topcoat
 The coating system in on the top of base coating and medium coatin。
    7 Finish coat
  A clear lacquer to increase or improve the coating gloss 。
    8 Decorative coat
   A coating for the decoration。
    9 Anti-corrosive coat
   Acoating to protect the basic board erosive 。
    10 Functional coat
   The main special function coating 。
    11 Appearance of coat
   An eye view coating static。
    12 Gloss
  A coating film reflect the light 。
    13 Adhesion
   The possibility of combining the coating and bottom layer。
    14 Hardness of film
   The coating resistant the physical attack performance 。
    15 Thiickness of dry film
   The drying film coating thickness。
    16 Thickness of wet film
   Wet coating thickness。
    17 Corrosion resistance
   The coating resistant corrupt attack performance。
    18 Durability
   The coating resistant the environment attack performance。
    19 Light fastness 
   The coating protective by the light performance。
    20 Anti-rusting
   The coating resistant the steel and alloy material or rust performance。
    21 Print resistance
   The coating resistant the surface press performance 。
    22  Flexibility
   The coating flexibility the commodity movement performance。
    23 Mildew(fungus)resistance
   The coating resistant the mildew grow performance。
    24 Flaking resistance
   The coating resistant the break off performance。
    25 Filiform corrosion resistance
   The coating resistant the rust performance。
    26 Cracking resistance
   The coating film resistant the creak performance。
    27 Chalking resistance
   The coating film resistant 。
    28 Scratch resistance
   The coating film resistant various grain attack and press attack performance。
    29 Wear resistance
   The coating film resistant abrasion 。
    30 Anti-fouling
   The performance to prevent coating firm surface grown and adhesive 。
    31 Solvent resistance
 Coating film to resistant various solvent performance 。
    32 Oil resistance
   Coating film resistant the oil attack performance。
    33 Water resistace
   The coating film resistant water attack performance。
    34 Chemicl resistance
   The coating film resistant the acid, alkali, salt chemical attack performance。
    35 Chipping resistance
   Coating film resistant some part break performance。
    36 Weathering resistance
   The coating film resistant atmosphere attack performance  。
    37 Humidity resistance
   The coating film resistant the heat attack。
    38 Ageing resistance
   The coating film resistant aging performance 。
    39 Heat resistance
   The coating film resistant heat attack 。
    40 Washability
    The coating get rid of washing corrupt performance. 。
    42 Grinability
   Coating film polished by the sanding paper, sanding cloth ext perfomance
    43 Cissing
   Some part of the coating film retrack or lower think of the coating film。
    44 Brush mark
   After the coating dry appear knurl。
    45 Blistering
   The coating film break off or bubble。
    46 Bleeding 
   The coating film color 。
    47 Creeping
  The dissolubility color chemical run out from the coating film。
    48 Creeping
   The wet coating excess the original cover area 。
    49 After tack
After the coating film dry, it become adhibit static 
    50 Blushing
    Make the coating become while or lost gloss。
    51 Orange peel
   The coating film appear orange goffer 。
    52 Edge tracking
   Coating film appear the incomplete remake at the edge after roller coating.
    53 Yellowing
   The coating, especially the white coating or the clear coating become to yellow during aging。
    54 Wrinkling
   The coating film become turn up because of the touch dry become too fast。
    55 Pinholing
   During the spray cover and drying period, the small pin hotel exist。
    56 Peeling
 The coating film break off。
    57 Sagging
   The coating spray and drying period appear the bottom edge become thick。
    58 Weathering
   The coating film change according to the atmosphere attack。
       60 Accelerated weathering test
  A test to strengthen the damage at the open air, we also call it physical test, make the pieces at the test lab which constructed by person。
    61 Humidity cabinet test
   The samples is tested in the constant temperature, constant humidity box to get resistant humidity, heat performance test. We also call it dampness box test。